Ⅰ. Pipe Introduction:
PE-RT (temperature-resistance polyethylene) pipe & tube are produced through the technology from DOWLEX*2388 of America and DX-800 of Korea SK Chemicals Co., and are marked by its super temperature-resistance performance owing to the inside special molecule structure.

Ⅱ. Application:
1). floor-heating; domestic, pool, kindergarten, rest home; city thawing system, etc
2). cold-hot water supplying system;
3). industrial water supplying system;
4). air-condition system
5). sanitation lines;
6). thermal spring and agricultural, breeding, garden virescence system

Ⅲ. Features:
1). Good thermal stability and long-term pressure resistance It can be applied in the heating and hot water pipe system ( the temperature up to 95 degree ) with the service life of over 50 years.
2). Good process ability Without considering the degree of cross linking and homogeneity, PE-RT pipe has the advantage of good homogeneity, stable performance and reliable quality.
3). Flexibility and easy installation Rolling and bending are allowed. The smallest bending radius equal to 5D and the pipe can't be rebounded. The stress in the bending part can be dispersed, avoiding the breakage caused by the focus of stress in the application. When installed under the environment of low-temperature, pre-heating of the pipe is no need, so the installation become easy and the cost is reduced.
4). Good impact strength and reliability It can be transported and installed in the low-temperature environment. The temperature of brittle fracture can reach -70 degree. Its better impact resistance is better than other pipes can avoid rough installation.
5). link by welding , easy to install and repair PE-RT is better than PEX in the link and repair. In the floor heating project, if the pipes are destroyed by external strength, they can be repaired by welding, which makes it easy, quick, safe.
6). higher cost performance ratio PE-RT has all the advantages of other radiant floor heating pipes with lower label cost of installation and repair, higher cost performance ratio.

Ⅳ. Specification:
PN1.25MPA
Size(mm)
16*2.0
20*2.0
25*2.3
32*2.9
PN1.6MPA
Size(mm)
16*2.0
20*2.3
25*2.8
32*3.6
PN2.0MPA
Size(mm)
16*2.2
20*2.8
25*3.5
32*4.4